Tech Talk & Articles > Fords

Mustang 351 @ SRPerformance

<< < (5/6) > >>

two89w:
Sin, your engine will be OK on the dyno right now.

I have had 3 new engines in the past 6 years. Two of them had been on the dyno straight after they were built with no problems.

68PONY:
I think sept / oct is a good time of year not to hot not to cold but then again any time is a good time to light the bbq with the boys and suck on a beer :6

Sinister:

--- Quote ---Originally posted by two89w
Sin, your engine will be OK on the dyno right now.

I have had 3 new engines in the past 6 years. Two of them had been on the dyno straight after they were built with no problems.
--- End quote ---


thought you werent supposed to take it past 2500rpm or is it ok to let it hit high revs for a few seconds???

two89w:

--- Quote ---Originally posted by Sinister

--- Quote ---Originally posted by two89w
Sin, your engine will be OK on the dyno right now.

I have had 3 new engines in the past 6 years. Two of them had been on the dyno straight after they were built with no problems.
--- End quote ---


thought you werent supposed to take it past 2500rpm or is it ok to let it hit high revs for a few seconds???
--- End quote ---


When you are bedding in a new (flat tappet) cam, you are supposed to run the engine for 20mins no lower than 2000rpms.

Any engine would survive a dyno run if its put together properly.

68PONY:
hi dave (two89w)i spoke to steve today to get the car  tuned on the dyno is $100 per hour.
cheers chris.

Navigation

[0] Message Index

[#] Next page

[*] Previous page