Club News > AMCCA Past Events

Re Trackday

<< < (3/11) > >>

418mach:
the Judgement Day is a spin off from The Day Of Drags which was a pretty good day and is growing in numbers each event and expect that it will get better every time. The Judment day and DOTD have a year of manufacture cutoff so the cars are from a similar period, DOTD  format was heads up qualifying before lunch then dial in your time eliminations after, then if your eliminated you can keep running in another group. I will going to the Nostalgias latter this and probably a starter for this if the dates are not too close. all great fun days

heven67:
WHEN.......I get my car back I will be up for it!
But before that I need to get it up on a dyno and see what my carby and timing is doing! anyone have any suggestions where I can go! someone whom has an idea on rotchesters!
LUVHEV:fingers:

sms777:

--- Quote from: heven67 link=topic=3425.msg20873#msg20873 ---WHEN.......I get my car back I will be up for it!
But before that I need to get it up on a dyno and see what my carby and timing is doing! anyone have any suggestions where I can go! someone whom has an idea on rotchesters!
LUVHEV:fingers:
--- End quote ---

Now....There is your problem. Rochester on a Ford.
What were you thinking?
I can guarantee it would perform better with a Holley 700 or 750 and i could tune it for you in ten minutes without going near a dyno.
Cheers, Chris.

SBC-68-FIREBIRD:
Judgement day is on Saturday the 13th of November & I spoke to the lady who runs the Nostalgia's & she said she is still waiting to get a confirmation from WSID but the original date they were given a few months ago was Sunday the 21st November. Only 1 week apart for both event which is a PITA, would be good if these are going to stay as annular events if they could spread them a bit further apart.

I know a few guys who are keen to get out to the track when they dont have to put up with the normal street meet crap, myself included.

Cant beat a Holley for ease :exact:

heven67:

--- Quote from: sms777 link=topic=3425.msg20874#msg20874 ---
--- Quote from: heven67 link=topic=3425.msg20873#msg20873 ---WHEN.......I get my car back I will be up for it!
But before that I need to get it up on a dyno and see what my carby and timing is doing! anyone have any suggestions where I can go! someone whom has an idea on rotchesters!
LUVHEV:fingers:
--- End quote ---

Now....There is your problem. Rochester on a Ford.
What were you thinking?
I can guarantee it would perform better with a Holley 700 or 750 and i could tune it for you in ten minutes without going near a dyno.
Cheers, Chris.
--- End quote ---




Do you think if it were a chev it would run better?
Sorry Chris Ive been there and one day it ran OK but the next it had a flat spot, the rottie runs quite nice...so at this stage I will stick to checking my AFR's are OK.

Tell you what, In the near future I will get another manifold and a holley, if you can get it to run smooth I will pay you, if you cant ............:hangloose:

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version