Author Topic: 69 Camaro wheel stud sizes & boltspacing ?  (Read 3331 times)

0 Members and 1 Guest are viewing this topic.

Angry

  • P Plater
  • **
  • Posts: 20
  • Welcome
  • Location: wagga
69 Camaro wheel stud sizes & boltspacing ?
« on: May 22, 2014, 08:08:27 PM »
Just ordering some parts , I need to know what the wheel stud sizes are on a 69 Camaro 10bolt
Also need to confirm the wheelstud spacing/bolt pattern for a 69 Camaro, is it 5 x 4.75" ??

Al
Al
69 Z28 Clone
AAA-Photography

69DirtyRat

  • Top Fuel Pilot
  • *****
  • Posts: 1734
Re: 69 Camaro wheel stud sizes & boltspacing ?
« Reply #1 on: May 22, 2014, 09:09:23 PM »
Thats correct, they are all the same for all chevy 5 stud cars around 60s-to 2000+
not sure of your backspace though if u need that?
1969 Corvette ZL-1 540ci 755hp
1972 Chevy Suburban 454ci
1959 Cadillac Fleetwood 75 Limo 390ci 325hp
www.ratpackmuscle.com

sms777

  • Rally Licence
  • ****
  • Posts: 763
  • Sponsor & The Mechanic
Re: 69 Camaro wheel stud sizes & boltspacing ?
« Reply #2 on: May 23, 2014, 01:28:16 PM »
Hi Al,
Wheel stud is 7/16 UNF, bolt circle on Camaros 4.75". Your back spacing is 4" inside from factory but I have fitted 5" back spacing wheels on them before. It will just clear the springs so you can fit some decent size rubber under.

Cheers, Chris. 

Phone 02 9793 3332
Biggles, The Flying Mechanic

Angry

  • P Plater
  • **
  • Posts: 20
  • Welcome
  • Location: wagga
Re: 69 Camaro wheel stud sizes & boltspacing ?
« Reply #3 on: May 23, 2014, 10:15:18 PM »
Thanks
Al
69 Z28 Clone
AAA-Photography

bonnevista

  • Top Fuel Pilot
  • *****
  • Posts: 1359
  • Club Super Hero
Re: 69 Camaro wheel stud sizes & boltspacing ?
« Reply #4 on: May 26, 2014, 11:06:31 AM »
Thats correct, they are all the same for all chevy 5 stud cars around 60s-to 2000+
not sure of your backspace though if u need that?

Andy, except full size chevy cars from 71 onwards.  Those cars went with the rest of the full size GM pack and used a half inch stud on a 5 inch bolt pattern...
Wiping out evil - one Ford at a time. 
[img width=175 height=100]http://am

Angry

  • P Plater
  • **
  • Posts: 20
  • Welcome
  • Location: wagga
Re: 69 Camaro wheel stud sizes & boltspacing ?
« Reply #5 on: May 28, 2014, 08:11:44 PM »
Im putting a 9" diff in the Camaro, about to order some 31 spline axles.
Just wanted to be sure of the bolt pattern n wheel stud size.
Thanks
Al
69 Z28 Clone
AAA-Photography

 

Phone 02 4627 7600