American Muscle Cars Australia

Tech Talk & Articles => GM Cars => Topic started by: Angry on May 22, 2014, 08:08:27 PM

Title: 69 Camaro wheel stud sizes & boltspacing ?
Post by: Angry on May 22, 2014, 08:08:27 PM

Just ordering some parts , I need to know what the wheel stud sizes are on a 69 Camaro 10bolt
Also need to confirm the wheelstud spacing/bolt pattern for a 69 Camaro, is it 5 x 4.75" ??

Al

Title: Re: 69 Camaro wheel stud sizes & boltspacing ?
Post by: 69DirtyRat on May 22, 2014, 09:09:23 PM

Thats correct, they are all the same for all chevy 5 stud cars around 60s-to 2000+
not sure of your backspace though if u need that?

Title: Re: 69 Camaro wheel stud sizes & boltspacing ?
Post by: sms777 on May 23, 2014, 01:28:16 PM

Hi Al,
Wheel stud is 7/16 UNF, bolt circle on Camaros 4.75". Your back spacing is 4" inside from factory but I have fitted 5" back spacing wheels on them before. It will just clear the springs so you can fit some decent size rubber under.

Cheers, Chris. 

Title: Re: 69 Camaro wheel stud sizes & boltspacing ?
Post by: Angry on May 23, 2014, 10:15:18 PM

Thanks

Title: Re: 69 Camaro wheel stud sizes & boltspacing ?
Post by: bonnevista on May 26, 2014, 11:06:31 AM

Quote from: 69DirtyRat on May 22, 2014, 09:09:23 PM

Thats correct, they are all the same for all chevy 5 stud cars around 60s-to 2000+
not sure of your backspace though if u need that?

Andy, except full size chevy cars from 71 onwards.  Those cars went with the rest of the full size GM pack and used a half inch stud on a 5 inch bolt pattern...

Title: Re: 69 Camaro wheel stud sizes & boltspacing ?
Post by: Angry on May 28, 2014, 08:11:44 PM

Im putting a 9" diff in the Camaro, about to order some 31 spline axles.
Just wanted to be sure of the bolt pattern n wheel stud size.
Thanks