American Muscle Cars Australia
Club News => Show Off Your Ride => Topic started by: Pana BB Duster on March 15, 2011, 08:47:36 AM
-
Here's a few pics of my '76 Plymouth Duster.. New wheels and driveline in it now...
[IMG=750x525]http://i497.photobucket.com/albums/rr333/duster440/19092010038.jpg[/IMG]
[IMG=750x525]http://i497.photobucket.com/albums/rr333/duster440/28072010018.jpg[/IMG]
[IMG=750x525]http://i497.photobucket.com/albums/rr333/duster440/IMG00001-20100807-1642.jpg[/IMG]
(http://i497.photobucket.com/albums/rr333/duster440/IMG00005-20100502-2136.jpg)
[IMG=750x525]http://i497.photobucket.com/albums/rr333/duster440/Picture055-1.jpg[/IMG]
[IMG=750x525]http://i497.photobucket.com/albums/rr333/duster440/IMG_4686.jpg[/IMG]
[IMG=750x525]http://i497.photobucket.com/albums/rr333/duster440/IMG_4692.jpg[/IMG]
[IMG=750x525]http://i497.photobucket.com/albums/rr333/duster440/DSCF0236.jpg[/IMG]
[IMG=750x525]http://i497.photobucket.com/albums/rr333/duster440/DSCF0268.jpg[/IMG]
-
:fantastic: Big Block cool:drink:
-
Looks great.
-
Awsome! She will look great in my workshop next to all the Mustangs. :rol:
Did anyone tell you that I am an expert in cutting holes in bonnets? :rub: :lol:
-
Oh no, not Mustangs... Don't park it next to Mustangs... :cry:
I've been thinking about Duster/Dart snorkel scoop actually. Want to keep it as original as possible though... So I take it I need to be careful getting my Duster anywhere near you with a plasma cutter or an oxy? :bats:
-
Plasma cutter?.....I can't afford sophisticated tools like that!
Chisel and hammer for me...:rol::rol::rol:
-
Plasma cutter?.....I can't afford sophisticated tools like that!
Chisel and hammer for me...:rol::rol::rol:
But he does use a new house brick when he polishes a car!:lol:
-
The instructions on the polish bottle did say clay block not clay brick
-
Plasma cutter?.....I can't afford sophisticated tools like that!
Chisel and hammer for me...:rol::rol::rol:
You are a true craftsman... LOL!
-
Awesome plymouth
-
Thanks heaps! Nearly there with the old girl. Just need to get engine tuned and should be right.. Got a few little things I need to do first like change alternator brackets, add temp switch, change tranny pan gasket and ECU module and then ready for tune... I'm bloody hanging to drive it...
-
Hey Pana!
When are you going to bring that beast over?
I promise I will tie all the Mustangs together in the corner of my shop while I am tuning it....:rol:
-
Is that Duster as in Feather Duster? :zip:
-
Is that Duster as in Feather Duster? :zip:
Don't laugh mate as there was a really late model of the Plymouth Duster called a 'Feather Duster' and 'Gold Duster'.. Too much Cheech and Chong in the 70's I reckon...
-
Hey Pana!
When are you going to bring that beast over?
I promise I will tie all the Mustangs together in the corner of my shop while I am tuning it....:rol:
I'll do shortly mate.. Just been moving house so it's been a nightmare...
-
Is that Duster as in Feather Duster? :zip:
Don't laugh mate as there was a really late model of the Plymouth Duster called a 'Feather Duster' and 'Gold Duster'.. Too much Cheech and Chong in the 70's I reckon...
What about the model targeted at women called the Gold Digger??:lol:
-
Is that Duster as in Feather Duster? :zip:
Don't laugh mate as there was a really late model of the Plymouth Duster called a 'Feather Duster' and 'Gold Duster'.. Too much Cheech and Chong in the 70's I reckon...
What about the model targeted at women called the Gold Digger??:lol:
In 73 they had a fold down rear seat model called a Space Duster.
:google:
-
Hey Pana!
When are you going to bring that beast over?
I promise I will tie all the Mustangs together in the corner of my shop while I am tuning it....:rol:
Hey Mate, quick question as well. I've got Sure Grip Centre I want to get put into the car. My diff is an 8.25 10 Bolt Chrysler and I've had new 3.55:1 gears put in and all new bearings etc.. Just need to get the Sure Grip put in. Can you recommend anyone to install and set backlash??
-
Hey Pana!
When are you going to bring that beast over?
I promise I will tie all the Mustangs together in the corner of my shop while I am tuning it....:rol:
Hey Mate, quick question as well. I've got Sure Grip Centre I want to get put into the car. My diff is an 8.25 10 Bolt Chrysler and I've had new 3.55:1 gears put in and all new bearings etc.. Just need to get the Sure Grip put in. Can you recommend anyone to install and set backlash??
I use Sydney Competition Warehouse, ph: 9891 5088. Talk to James, he has done a few Mopar diffs for us, his work is excellent and cheap.
It should be an 8.75 not an 8.25. If it is then you can just pull the axles out and pop the whole center out like a Ford 9 inch.
I am happy to do it for you if you do not want to get dirty. :rub:
Cheers, Chris.
-
rquote]
I use Sydney Competition Warehouse, ph: 9891 5088. Talk to James, he has done a few Mopar diffs for us, his work is excellent and cheap.
It should be an 8.75 not an 8.25. If it is then you can just pull the axles out and pop the whole center out like a Ford 9 inch.
I am happy to do it for you if you do not want to get dirty. :rub:
Cheers, Chris.[/quote]
Hey Chris, nah, it's an 8 1/4.. Some of the small block Duster's and Dart's had 7 1/4 and 8 1/4 differentials. The 8.25 as my Duster has is a pretty decent diff and can take a bit of punishment...
-
Hi Pana you could just buy a Dana 60 from MOSER & just bolt it in :lol: :lol: :lol:
-
Hi Pana you could just buy a Dana 60 from MOSER & just bolt it in :lol: :lol: :lol:
Dana 60's are for trucks......:zip:
-
Hi Pana you could just buy a Dana 60 from MOSER & just bolt it in :lol: :lol: :lol:
Dana 60's are for trucks......:zip:
Ha Ha Ha! I reckon Dana 60 would weigh more than the fricken Duster... LOL!
-
Just throw in a Ford 9 inch.:way:
-
Just throw in a Ford 9 inch.:way:
We're all really good at spending other people's money.:lol:
-
Just throw in a Ford 9 inch.:way:
We're all really good at spending other people's money.:lol:
It's good fun aint it.... I'm surprised no ones suggested a blower as well yet...
-
Just throw in a Ford 9 inch.:way:
We're all really good at spending other people's money.:lol:
It's good fun aint it.... I'm surprised no ones suggested a blower as well yet...
BLOWER?
Take it easy mate.....we are slowly working our way forward from the rearend.
Since you mentioned it.....did I tell you I am very good at cutting even larger holes on bonnets? :rol:
-
[/quote]
BLOWER?
Take it easy mate.....we are slowly working our way forward from the rearend.
Since you mentioned it.....did I tell you I am very good at cutting even larger holes on bonnets? :rol:[/quote]
Bloody hell! My care is gonna have a fair bit of man made air conditioning by the sounds of it...
Hey Chris, are you there tomorrow around lunch. Might pop down and say gidday as I've got to go to Toys R Us Bankstown (Christie Centre) and check out a few things (I work at Toys R Us Head Office in Regents Park - Buyer for Boys Toys)
-
See you then,
Cheers, Chris
-
See you then,
Cheers, Chris
Cheerz mate....
:drink:
-
(I work at Toys R Us Head Office in Regents Park - Buyer for Boys Toys)[/quote]
I envy your job. I say it probably keeps you young.
-
(I work at Toys R Us Head Office in Regents Park - Buyer for Boys Toys)
I envy your job. I say it probably keeps you young.[/quote]
Yeah, but the job itself can be stressful and working some silly hours and lots of travelling. I suppose every job has it's pro's and con's.. I've been there 10 years so something must be good about it...
:banghead:
-
As with any job. It brings in the money to spend on our hobbies.
-
As with any job. It brings in the money to spend on our hobbies.
Very true... Very true....
-
Had the pleasure of meeting Big Bad Chris today and looks like he will have another Mopar in his shed in a couple of weeks. Might help him and keep him from going insane with all of those Muzzie's in there... :logic:
-
Thanks Pana, it has been a pleasure meeting you too....
Guess what turned up on a tilt tray 30 minutes after you left....
Another Mustang!
Fresh out of the shipping container, still registered in CA, quiet nice though, should not give us too much grief.
They must be running out of Mustangs in the US soon. :rol:
I need your Mopar in the shop to give them a fright. :lol:
-
Thanks Pana, it has been a pleasure meeting you too....
Guess what turned up on a tilt tray 30 minutes after you left....
Another Mustang!
Fresh out of the shipping container, still registered in CA, quiet nice though, should not give us too much grief.
They must be running out of Mustangs in the US soon. :rol:
I need your Mopar in the shop to give them a fright. :lol:
Oh no.. Not another one.. Fricken hell you poor bugger... Ha Ha Ha! Yeah, there'll be none left in the US.. Let's send 'em to NZ... :shades:
In a couple of weeks you'll have the old Feather Duster there too... Can't wait to see it after you work your magic...
-
A couple of updated pics of the Feather Duster on it's way to SMS via Bottle Shop.... Geez I hope the poor thing doesnt end up with a hole in it's bonnet....
(http://i497.photobucket.com/albums/rr333/duster440/IMG00322-20110413-0956.jpg)
(http://i497.photobucket.com/albums/rr333/duster440/IMG00324-20110413-0957.jpg)
-
Bit of an update on the old Feather Duster Taxi Cab... Apparently it might have a diff back in it today.. Wooohooo!
-
Bit of an update on the old Feather Duster Taxi Cab... Apparently it might have a diff back in it today.. Wooohooo!
The diff is back in it alright, which makes it a rolling stock. As for rolling under it's own power.....that's an another matter.
It is an electrical nightmare. As usual with owner modified vehicles...:zip: (Disclaimer)(Disclouser)(Dis...whatever).
Do not panic....we are on to it. You will will be back on the road soon to terrorise those Muzzy boys once again with that Mopar Muscle :rub:
-
Bit of an update on the old Feather Duster Taxi Cab... Apparently it might have a diff back in it today.. Wooohooo!
The diff is back in it alright, which makes it a rolling stock. As for rolling under it's own power.....that's an another matter.
It is an electrical nightmare. As usual with owner modified vehicles...:zip: (Disclaimer)(Disclouser)(Dis...whatever).
Do not panic....we are on to it. You will will be back on the road soon to terrorise those Muzzy boys once again with that Mopar Muscle :rub:
What's the electrical issue Mr Chris??? Is it the charging issue??? :banghead:
-
Bit of an update on the old Feather Duster Taxi Cab... Apparently it might have a diff back in it today.. Wooohooo!
The diff is back in it alright, which makes it a rolling stock. As for rolling under it's own power.....that's an another matter.
It is an electrical nightmare. As usual with owner modified vehicles...:zip: (Disclaimer)(Disclouser)(Dis...whatever).
Do not panic....we are on to it. You will will be back on the road soon to terrorise those Muzzy boys once again with that Mopar Muscle :rub:
I once had an electrical nightmare - it was shocking!!:rol:
-
[/quote]
I once had an electrical nightmare - it was shocking!!:rol:[/quote] :rub:
-
I once had an electrical nightmare - it was shocking!!:rol:[/quote] :rub:[/quote]
Funny buggers!....:rol::rol::rol:
It's all sorted Pana, just a few loose connections, some fine tuning and ready to rock'n roll.
:rub:
-
I once had an electrical nightmare - it was shocking!!:rol:
:rub:[/quote]
Funny buggers!....:rol::rol::rol:
It's all sorted Pana, just a few loose connections, some fine tuning and ready to rock'n roll.
:rub:[/quote]
Wooohooooo! Sensational! I can't wait... :drink:
-
Well I'll be ding-danged! Pana won't know what to do with himself with a fully functioning Duster.
How long's it been since you drove it worry-free mate?
-
Well I'll be ding-danged! Pana won't know what to do with himself with a fully functioning Duster.
How long's it been since you drove it worry-free mate?
It's been about a year since I pulled the small block out of it... Haven't driven it really since as engine took a fair while to be done and then had to accumulate parts and all the business trips and house move in between... Been hectic!
I'll be havin' a few beers next week to celebrate.. Knowing my luck something will happen to the Duster... :way:
-
Well I'll be
I'll be havin' a few beers next week to celebrate.. Knowing my luck something will happen to the Duster... :way:
It's all good mate. I'm sure Chris accepts Visa & Mastercard!
:rub:
-
It's all done... Duster is tuned and ready for cruising... Needs a Stall Converter something bad but otherwise she's running nice...
Gotta thank Chris at SMS for sorting the old girl out... What a fricken legend!
Had the pleasure of meeting HemiFish tonight so I would say a lot of the Mustang owners ears must've been burning as it was Mopar's all around...
-
Hi Pana BB Duster
I had the pleasure of seeing your car at SMS today.
Looks like a beast.
I would check how much tread chris left on those rear tyres:rol::rol::rol:
And a very big thank you to Doctor Chris from SMS getting my car running so good that it now fills like he added another 60hp the 351 motor sorry 302
-
Hi Pana BB Duster
I had the pleasure of seeing your car at SMS today.
Looks like a beast.
I would check how much tread chris left on those rear tyres:rol::rol::rol:
And a very big thank you to Doctor Chris from SMS getting my car running so good that it now fills like he added another 60hp the 351 motor sorry 302
I think Chris, Toby and Darren were a little busy enjoying a few beverages.... :drink:
-
Hi Pana BB Duster
I had the pleasure of seeing your car at SMS today.
Looks like a beast.
I would check how much tread chris left on those rear tyres:rol::rol::rol:
And a very big thank you to Doctor Chris from SMS getting my car running so good that it now fills like he added another 60hp the 351 motor sorry 302
I think Chris, Toby and Darren were a little busy enjoying a few beverages.... :drink:
Just celebrating a couple of successful tune ups...Next time you guys bring the drinks.:rol: (just kidding)....(or am I).:lol:
-
[/quote]
I think Chris, Toby and Darren were a little busy enjoying a few beverages.... :drink:[/quote]
Just celebrating a couple of successful tune ups...Next time you guys bring the drinks.:rol: (just kidding)....(or am I).:lol: [/quote]
Not a problem Chris.. It help when your Father In Law works for McWilliams Wines... I'll be providing... Any requests? Let me know the next SMS successful tune up session... :drink:
-
Everyday......
-
Everyday......
:hesaid:....Thanks Eddie. :drink:
-
So Pana how is the duster going have you clocked up some miles yet?
-
So Pana how is the duster going have you clocked up some miles yet?
Yeah Pana.....
Been quiet lately....Is everything allright with the Taxi Cab?
I need to know first hand....
-
All is good mate... I ordered converter from the US and just waiting for it to arrive. Had an electrical issue with the lights but that's sorted..
-
Should have bought a Mustang, much more reliable. Eddie
-
Should have bought a Mustang, much more reliable. Eddie
That's why Chris Sinclair's garage is full of them.:lol::lol:
-
Like thorough bred horses, one has to pamper one's Mustang. They respond well to care and maintenance. That's my view and I'm sticking to it. Eddie
-
Like thorough bred horses, one has to pamper one's Mustang. They respond well to care and maintenance. That's my view and I'm sticking to it. Eddie
They're Ford Falcons under the skin.:lol:
-
I guess all Pontiacs, Buicks and Cadillacs are Chebbys under their skin too. Eddie :smile:
-
I guess all Pontiacs, Buicks and Cadillacs are Chebbys under their skin too. Eddie :smile:
Not even the wheel bolt pattern is the same as Chevy - in full size cars.
Whereas, Mustangs are actually Ford Falcons under the skin.
BTW, if you're out at a car run one night and you're a bit bored, get the party started by telling a Cadillac guy that his car is just the same as a Chevy.:lol: