I am looking for a GOOD machine shop/bottom end builder for my Ford FE BB.
Any recomendations;7
David.
(http://xtremecarzone.com.au/STORAGE/PICTURES/PicsAndPrompts08/Kuiper02.jpg)
Parry,s engine reconditioning Arncliffe
Harris engines at Revesby.
Westend PerformanceUnit 5/13 Mill Road, Campbelltown, NSW 2560
p: (02) 4625 4100 f: (02) 4625 5740
http://www.westendperformance.com.au (http://www.westendperformance.com.au)
(http://i245.photobucket.com/albums/gg48/joe74ta/baa-09-logo1.jpg)
Ask 68 pony ;16
QuoteOriginally posted by two89w
Ask 68 pony ;16
You know the saying dave if you don't have anything good to say, now go back and hide in that hole you came from.
Dave (gta390) can't help you on this one, but you know who NOT! to take it to.
QuoteOriginally posted by ausmonza
Parry,s engine reconditioning Arncliffe
Sorry can not recommend on MY and i quote "MY" experience
if you need to know more you can u2u me
QuoteOriginally posted by 68PONY
QuoteOriginally posted by two89w
Ask 68 pony ;16
You know the saying dave if you don't have anything good to say, now go back and hide in that hole you came from.
Dave (gta390) can't help you on this one, but you know who NOT! to take it to.
Sorry mate just kidding ;y
I did see that someone recomended them, maybe just bad luck that time round.
Westend and Kuiper aren't to far might give them a call next week.
1 litre of paint has arrived to paint the appertures before she comes home, went with Aurora Blue, its on the new Mazda RX8.
lowered suspension and shocks have been ordered, new steering componenets are on there way.
New gauges as i am ditching the original and making a custom dash/gauge setup.
Trust me that ain't no Banana in my pocket i am happy about it:)
David.
QuoteOriginally posted by two89w
QuoteOriginally posted by 68PONY
QuoteOriginally posted by two89w
Ask 68 pony ;16
You know the saying dave if you don't have anything good to say, now go back and hide in that hole you came from.
Dave (gta390) can't help you on this one, but you know who NOT! to take it to.
Sorry mate just kidding ;y
Now what did I tell you BIGGS? (http://i142.photobucket.com/albums/r120/heven67/mad%20pictures/headmaster.jpg)
Parrys used to (years ago ) build our race car engines .and many many others as well ,maybe the business has changed over the years :(
Old man Parry was a keen drag racer ....maybe the younger generation never kept up with what should be done
You crack me up Hev ;J
Peninsular Engine Services.
11 Sydenham Rd,
Brookvale.
Ph. 9939 2801.
Phil and Daniel Benfield. Father and son business. Phil's been there about a million years. As well as experience in building brand X (who hasn't), he's built plenty of Ford, Chrysler and the 'other' GM engines.
Joe, Have you or someone you know used Westend Performance?
John Kuiper, 9 out of 10
Westend???... well, Sam is a good and careful machinist as long as you have lots of patience. I have been waiting for 6 months for him to machine a 308 for me. Lucky my customer is very understanding and his car still at the painters.
I would highly recommend Duncan Foster at Moorebank. I have been using them for over 10 years, average turnaround for a complete job like chemical clean, bore hone deck fit pressed pistons full balance on a short assembly never more than 1 week. Price is a bit on the high side but you get quranteed quality.
I do all assembly and blue printing myself.
Quote from: GTA390 link=topic=2500.msg13741#msg13741Joe, Have you or someone you know used Westend Performance?
Dave my mate round the corner Had Sam build the supercharged Chev in his 69 Camaro he is very happy with it send me a u2u if you want to talk to him and I can give you his number.