Author Topic: Stainless trim Polishing (Read 3203 times)

GAS455 · « **on:** May 31, 2010, 07:15:28 PM »

What is the best way to go about Polishing my stainless trim by hand.

I have never done it before.

It's for my 57 Ponti....there is plenty of trim to do. The car has been off the road for many many years.

GTA390 · « **Reply #1 on:** May 31, 2010, 07:38:21 PM »

Try Autosolve, get almost any auto shop, in a tube, about the same texture as toothpaste.

Garrett · « **Reply #2 on:** June 01, 2010, 07:25:28 PM »

Anything that needs a touch up.

I and many swear by him

http://www.classiccargurus.com.au/classic-car-articles.asp?ArticleID=82

No repairs needed can polish on car, unless he is too busy.

mattlea1 · « **Reply #3 on:** June 02, 2010, 09:55:48 AM »

We have an advertiser called Stainless Moulding Repairs and Polishing they are at Riverstone 9838 1175

GAS455 · « **Reply #4 on:** June 02, 2010, 10:49:14 AM »

Quote from: mattlea1 link=topic=3321.msg20013#msg20013

We have an advertiser called Stainless Moulding Repairs and Polishing they are at Riverstone 9838 1175

It's the same guy.

Alan Mocoy.
He is on Garfield Rd.

KrazyOztralien · « **Reply #5 on:** June 03, 2010, 08:51:53 AM »

i swear by this stuff for chrome and stainless trim made my wheels look like new again.

available in most kmarts and big w's.
you only need to use a tiny bit. one you polish once you should only need to wipe dirt off with a terry towel cloth

Garrett · « **Reply #6 on:** June 03, 2010, 07:52:08 PM »

Quote from: GAS455 link=topic=3321.msg20014#msg20014

Quote from: mattlea1 link=topic=3321.msg20013#msg20013
We have an advertiser called Stainless Moulding Repairs and Polishing they are at Riverstone 9838 1175

It's the same guy.

Alan Mocoy.
He is on Garfield Rd.

Family are a pleasure to deal with and his work is 2nd to non.

GAS455 · « **Reply #7 on:** June 03, 2010, 08:06:12 PM »

Quote from: Garrett link=topic=3321.msg20044#msg20044

Quote from: GAS455 link=topic=3321.msg20014#msg20014
Quote from: mattlea1 link=topic=3321.msg20013#msg20013
We have an advertiser called Stainless Moulding Repairs and Polishing they are at Riverstone 9838 1175

It's the same guy.

Alan Mocoy.
He is on Garfield Rd.

Family are a pleasure to deal with and his work is 2nd to non.

I will be getting them to do some polishing work on the grill and stuff, But I don't think I could afford to get everything farmed out for polishing.

I drive past his workshop atleast twice a week in the truck.

joe74ta · « **Reply #8 on:** June 03, 2010, 08:14:05 PM »

Quote from: KrazyOztralien link=topic=3321.msg20033#msg20033

i swear by this stuff for chrome and stainless trim made my wheels look like new again.

available in most kmarts and big w's.
you only need to use a tiny bit. one you polish once you should only need to wipe dirt off with a terry towel cloth

this stuff is the best I've seen works a treat on aluminium too.
Give it a go Greg I know your a do it your self guy its easy.

KrazyOztralien · « **Reply #9 on:** June 03, 2010, 09:28:38 PM »

mate ill bring some over next time i see you

Author Topic: Stainless trim Polishing (Read 3203 times)

GAS455

GTA390

Garrett

mattlea1

GAS455

KrazyOztralien

Garrett

GAS455

KrazyOztralien