Mustang 351 @ SRPerformance

[two89w]

Sin, your engine will be OK on the dyno right now.

I have had 3 new engines in the past 6 years. Two of them had been on the dyno straight after they were built with no problems.

[68PONY]

I think sept / oct is a good time of year not to hot not to cold but then again any time is a good time to light the bbq with the boys and suck on a beer :6

[Sinister]

Originally posted by two89w
Sin, your engine will be OK on the dyno right now.

I have had 3 new engines in the past 6 years. Two of them had been on the dyno straight after they were built with no problems.

thought you werent supposed to take it past 2500rpm or is it ok to let it hit high revs for a few seconds???

[two89w]

Originally posted by Sinister

Originally posted by two89w
Sin, your engine will be OK on the dyno right now.

I have had 3 new engines in the past 6 years. Two of them had been on the dyno straight after they were built with no problems.

thought you werent supposed to take it past 2500rpm or is it ok to let it hit high revs for a few seconds???

When you are bedding in a new (flat tappet) cam, you are supposed to run the engine for 20mins no lower than 2000rpms.

Any engine would survive a dyno run if its put together properly.

[68PONY]

hi dave (two89w)i spoke to steve today to get the car  tuned on the dyno is $100 per hour.
cheers chris.

[two89w]

Originally posted by 68PONY
hi dave (two89w)i spoke to steve today to get the car  tuned on the dyno is $100 per hour.
cheers chris.

Thanks Chris.

I will give Steve a call to work out a time.

Cheers Dave